Transition Reducer In-Line Heat Shrink Splice (25kv)
TE Connectivity’s (TE) Raychem HVS-T/HVSR-T trifurcating transition splices greatly reduce the complexity of splicing one 3/C PILC cable to three 1/C polymeric cables. By converting the PILC cable to a polymeric equivalent, the splices eliminate compound filling and difficult lead wiping which lets you get on and off the job site quickly.
Heat-shrink components help to eliminate lead sleeve failures by replacing lead sleeves and wipes that can crack due to corrosion or cable flexing. HVS-T/HVSR-T series splices provide solderless ground braid connection for PILC cable.
Tested to the electrical and load cycling requirements of IEEE 404 one 3/C (VCLC) cable to three 1/C poly cable. The HVSR kits are for use when the PILC/VCLC cable has a much smaller conductor size than the poly cable
Key Features:
- Reduce the complexity of splicing one 3/C PILC cable to three 1/C polymeric cables
- Tested to the electrical and load cycling requirements of IEEE 404
PRODUCT SELECTION INFORMATION: DIMENSIONS IN INCHES (MM)
Part # | Conductor Size (AWG/kcmil) | Insulation Diameter (Min. - Max.)- PILC | Insulation Diameter (Min. - Max.)- POLY | Jacket | Maximum Connector Dimensions- OD | Maximum Connector Dimensions- Length | Kit Installed Length | Required Installation Space | Voltage |
|---|---|---|---|---|---|---|---|---|---|
HVSR-T-2583E | 500 - 600 750 - 1000 | 1.25 - 1.40 (32 - 36) | 1.55 - 1.90 (39 - 48) | 2.15 (55) | 1.85 (47) | 8.00 (203) | 48 (1219) | 77 (1955) | 25 kV |
