3/C PILC/VCLC To 1/C POLY Trifurcating Transition and Transition Reducer Kit (HVSR-T)
TE Connectivity’s (TE) Raychem HVS-T/HVSR-T trifurcating transition splices greatly reduce the complexity of splicing one 3/C PILC cable to three 1/C polymeric cables. By converting the PILC cable to a polymeric equivalent, the splices eliminate compound filling and difficult lead wiping which lets you get on and off the job site quickly.
Heat-shrink components help to eliminate lead sleeve failures by replacing lead sleeves and wipes that can crack due to corrosion or cable flexing. HVS-T/HVSR-T series splices provide solderless ground braid connection for PILC cable.
Tested to the electrical and load cycling requirements of IEEE 404 one 3/C (VCLC) cable to three 1/C poly cable. The HVSR kits are for use when the PILC/VCLC cable has a much smaller conductor size than the poly cable.
Key Features:
- Reduce the complexity of splicing one 3/C PILC cable to three 1/C polymeric cables
- Tested to the electrical and load cycling requirements of IEEE 404
PRODUCT SELECTION INFORMATION: DIMENSIONS IN INCHES (MM)
Part # | Conductor Size (AWG/kcmil) | Insulation Diameter (Min. - Max.)- PILC | Insulation Diameter (Min. - Max.)- POLY | Jacket | Maximum Connector Dimensions- OD | Maximum Connector Dimensions- Length | Kit Installed Length | Required Installation Space |
|---|---|---|---|---|---|---|---|---|
HVSR-T-1584 | 250 - 500 750 - 1000 | 0.85 - 1.30 (22 - 33) | 1.25 - 1.80 (32 - 46) | 2.15 (55) | 1.60 (41) | 8.00 (203) | 48 (1219) | 69 (1753) |
