In-Line Heat Shrink Transition Reducer Splice (15kV)
TE Connectivity’s (TE) HVSR “reducer” kits are used as a transition splice when the PILC/VCLC conductor size is much smaller than that of the poly cable. It can be used as an in-line splice for paper-insulated, lead-covered (PILC) cable or varnished cambric-insulated, lead-covered (VCLC) cable. It can also be used as a transition splice — PILC/VCLC to poly (copper tape, lead sheath, wire shield, UniShield, or jacketed/unjacketed concentric neutral) cable.
Key Features:
- Tested to the electrical and load cycling requirements of IEEE 404
- PILC splices utilize highly effective oil-stop systems
PRODUCT SELECTION INFORMATION: DIMENSIONS IN INCHES (MM)
Part # | Voltage | PILC/POLY Conductor Size (AWG/kcmil) | Insulation Diameter (min. - max.)- PILC | Insulation Diameter (min. - max.)- POLY | Connector Dimension- Both Cables OD | Connector Dimension- PILC/PILC Length | Connector Dimension- PILC/ POLY Length | Kit Installed Length | Required Installation Space |
|---|---|---|---|---|---|---|---|---|---|
HVSR-1583 | 15 kV | 4/0 - 350 500 - 750 | 0.80 - 1.10 (20 - 28) | 1.10 - 1.60 (28 - 41) | 1 .60 (41) | - | 7.0 (178) | 37 (940) | 87 (2210) |
