In-Line Heat Shrink Transition Splice (35kV)
TE Connectivity’s (TE) HVSR “reducer” kits are used as a transition splice when the PILC/VCLC conductor size is much smaller than that of the poly cable. It can be used as an in-line splice for paper-insulated, lead-covered (PILC) cable or varnished cambric-insulated, lead-covered (VCLC) cable. It can also be used as a transition splice — PILC/VCLC to poly (copper tape, lead sheath, wire shield, UniShield, or jacketed/unjacketed concentric neutral) cable.
Key Features:
- Tested to the electrical and load cycling requirements of IEEE 404
- PILC splices utilize highly effective oil-stop systems
PRODUCT SELECTION INFORMATION: DIMENSIONS IN INCHES (MM)
Part # | Voltage | PILC/POLY Conductor Size (AWG/kcmil) | Insulation Diameter (min. - max.)- PILC | Insulation Diameter (min. - max.)- POLY | Connector Dimension- Both Cables OD | Connector Dimension- PILC/PILC Length | Connector Dimension- PILC/ POLY Length | Kit Installed Length | Required Installation Space |
|---|---|---|---|---|---|---|---|---|---|
HVS-3582D | 35 kV | 1/0 - 250 | 1.05 - 1.40 (27 - 36) | 1.05 - 1.40 (27 - 36) | 1 .20 (30) | 3.5 (89) | 5.5 (140) | 40 (1016) | 62 (1575) |
