A Fast And Effective Gel Remover For Loose Tube, Ribbon, And Coaxial Cable.

Polywater® SqueekyKleen™ quickly removes gels, leaves no residue, and fans fiber with just two swipes—making cable preparation as efficient as possible. It creates a safer working environment in splice trailers and vaults with lower vapor concentrations than alcohol. Polywater SqueekyKleen is available in a selection of sizes and convenient packages, from single saturated towelettes to bulk liquid to meet your needs.

Specifications and Applications:

Cleaning: When wiping a 3-foot section of 12-count fiber from a buffer tube, a saturated towelette will squeak and fan fibers with 2 wipes

Solvency Power: At 68°F (20°C) it will dissolve a 0.02” (0.5-mm) film of PE/PJ or ETPR grease completely from cable jacket with less than two minutes of vigorous agitation (no wiping).

Residue: : When placed on a clean glass panel and dried, the solvent shall leave less than 100 parts per million of residue (<100 ppm).

Water Content: When tested by the ASTM 1533B method, water content shall be less than 75 parts per million (<75 ppm).

Flash Point: When tested via a Pensky-Martin Closed Cup Test (ASTM D93), the cleaner shall have a flash point above 140°F (60°C).

Product/Package Notes:

• Compatible with polyacrylate cladding and ribbon fiber.
• Low residue, <100 ppm per ASTM D2369.
• RoHS and WEEE compliant.
• High purity solvent does not contain water, <75 ppm per ASTM D1533B.
• Effectively removes filling gels and powders.
• Non-linting, durable towel with apertures hold and contain contaminants.
• Does not stress crack polyethylene per ASTM D1693.
• Does not stress crack polycarbonate.