In-Line Heat Shrink Transition Splice
TE Connectivity’s (TE) Raychem HVS-T trifurcating transition splices greatly reduce the complexity of splicing one 3/C PILC cable to three 1/C polymeric cables. By converting the PILC cable to a polymeric equivalent, the splices eliminate compound filling and difficult lead wiping which lets you get on and off the job site quickly.
Heat-shrink components help to eliminate lead sleeve failures by replacing lead sleeves and wipes that can crack due to corrosion or cable flexing. HVS-T series splices provide solderless ground braid connection for PILC cable. Tested to the electrical and load cycling requirements of IEEE 404 one 3/C (VCLC) cable to three 1/C poly cable.
Key Features:
- Reduce the complexity of splicing one 3/C PILC cable to three 1/C polymeric cables
- Tested to the electrical and load cycling requirements of IEEE 404
PRODUCT SELECTION INFORMATION: DIMENSIONS IN INCHES (MM)
Part # | Conductor Size (AWG/kcmil) | Insulation Diameter (Min. - Max.)- PILC | Insulation Diameter (Min. - Max.)- POLY | Jacket | Maximum Connector Dimensions- OD | Maximum Connector Dimensions- Length | Kit Installed Length | Required Installation Space |
|---|---|---|---|---|---|---|---|---|
HVS-T-1581E-S | 1/0 - 4/0 | 0.65 - 1.00 (17 - 25) | 0.70 - 1.05 (18 - 27) | 1.40 (36) | .90 (23)) | 2.50 (63) | 40 (1016) | 61 (1550) |
