Specifications:
- 1-1/4 YaleGrip 14,400 pound WLL
- for use on cable diameters 7/8″ – 1-3/4″
- Eye size – 12 inches
- Tail length before installation – 16.0 feet
- Working Load Limit – 14,400 Lbs.
- Color – Black
- ALWAYS SIZE THE GRIP BASED ON ANTICIPATED LOAD FIRST, NOT BY THE CABLE DIAMETER IT FITS
Description:
1-1/4″ YaleGrip black – 14,400 pound WLL
YaleGrips can be used for temporary or permanent eyes, both in midspan or on the end.
Size the grip by anticipated loads, not by the cable size it fits. When the anticipated load needs to be spread over a wider surface area, a six-leg grip is suggested.
A YaleGrip is a pulling and stopping grip used in a variety of applications including electrical-line construction work, deployment and retrieval of cables, marine stoppers on hawsers, and for temporary or permanent strain relief. A YaleGrip is applied quickly over a wide range of cable diameters without the aid of specialized tools. YaleGrips are noncorrosive, have good dielectric properties and are compact and lightweight.
Larger-sized cables may be accommodated by lengthening tail dimension (“L”).
A 1-1/4 YaleGrip is far stronger than wire mesh grips and does not form dangerous “fishhooks” making it safer to handle.
Finishing options include urethaning the entire grip which extends the grip’s life. This is the “marine treatment.” Extended tails are also available to accommodate larger cables and hardware can be added to the eye, such as stainless thimbles, which enhances performance.
